From contributor M I replaced the transom in my boat several years ago and sandwiched multiple layers of ply to get the correct thicknessIf you are not already planning to do solook at using marine grade plywood for this project.
what is the best plywood to use to rebuild transom Is marine ply the norm transom repair plywoodFor the transomjust go with the marine plywood if you
As time and usage accumulatea polymer transom grows weaker but wood remains as strong as ever perhaps even strengthening with time! A properly installed wood transom made with treated marine plywood and encased in fiberglass can outlast a plastic one.
When we extracted the transom we found that it was of plywood ( marine )inches high by about inches longHaving done all this work and having much to do to reinstall new transom material I pose the following question to the gurus here What is the absolute best transom material to use as a replacement
Rebuilding a Transom Interlux Because of the flange on the boat shown herea single piece of marine grade plywood could not be dropped into place.
Treated plywood is best used on flat surfaces like exterior floors and wallsthat leaves you with the exterior plyand fasten to transom plywood with
I would recommend using marine grade plywood to do a transomAll of my hull panels that are glassed are made out of marine grade plywoodunder marine plywood
White Oak or Mahagony is the best optionBoth are naturally rot resistant and will last times longer than plywoodPlus they are stronger than plywoodexcept for marine grade plywood or rather plywood with no voids.
Adding fiberglass and resin to the transom wood for strength and water proofingUnderstanding Marine Sealants Duration Fibreglassing onto Plywood Sheathing a boat s wheelhouse
I m trying to find alternatives to wood in transom materialsI know plywood reigns supremebut I m looking for viable alternativesThe application
Transom Fabricationthe old rotten transom and use it as a template as best as you canwith marine grade plywood instead or do you think exterior
We then use marine grade plywood to construct the shape and thickness of your original transom and reinforce it for durabilityGeorges has repaired hundreds Aluminum Boat transom including many Lund transomsCrestliner transoms Alumacraft transoms and many other manufacturers.
Marine Plywood Transom Rebuild FINALLY! Michael RomerReplacing The Transom On A Boston Whaler ~ Installing The New Plywood Core Marine plywood testWhat s the best to seal with
I know plywood reigns supremebut I m looking for viable alternatives Construction Materials Alternative materials for transomsboat is out of my
I picked up a piece of CDX last month from the lumber yard and the best they had were all racked like a potato chipMarine plywood for transom Marine ply can
I m going to be laminating sheets of marine ply for transomDo I first need to sand both sides before epoxy ing Best to either cut to size after glue up
Can anyone tell me what is the best plywood for transoms and who carries it for transom replacement Looking for a supplier in Ohio Thanks guys
If there is any curve to the transomthis thickness is best made up of two three quarter inch or three half inch thick layers of plywoodYou can use top of the line marine plywood or lumberyard
Marine plywood is a good material for a transom on the basis of its strengthits weight and its costMarine plywood is not very good on the basis of its tendency to decay rot and lose strength when saturated with water.
Re best wood for transom replace I think that if your doing the transom I would spend the extra money and buy Marine plywoodIt has more plys than any other plywood and therefor it is much more stronger then regular wood.